What are hard water and soft water?<\/h2>\n\n\n\n
Hard water contains high calcium (Ca2+<\/sup>) and magnesium (Mg2+<\/sup>) ions concentrations, and can also be defined as the concentration of multivalent cations. Multivalent cations mean metal ions with a charge > 1+, commonly 2+. These cations dissolve in water by leaching from minerals; limestone, dolomite, calcite, and gypsum within an aquifer.<\/p>\n\n\n\n Hardness causes severe issues in commercial and residential fields; Plumbing issues, breakdowns of cooling towers, boilers, laundry issues.<\/p>\n\n\n\n Removal of high concentrated multivalent cations (Ca2+<\/sup>, Mg2+<\/sup>) in hard water is called soft water.<\/p>\n\n\n\n Water softeners need to soften the water. Sometimes, used to remove iron by maintaining accurate conditions. Removal of hardness in water can reduce serious issues discussed above. Raw water treated with hardness will result in high performance in boilers and cooling towers and reduce your huge maintenance cost. Water softeners reduce all the issues due to scaling and save your money.<\/p>\n\n\n\n The Main Component of a softener is the resin bed.<\/p>\n\n\n\n There are artificial resins and natural resins. Natural green sand called glauconite has low exchange capabilities and was once widely used but has strong physical stability than synthetic resins. Synthetic zeolites (manmade) or polystyrene resins are most common in the industry. Cost is tolerable, and resin quality can be controlled. They also have higher ion exchange (IX) capacities than natural materials. Manmade Ion exchange resins are tiny, porous round plastic beads.<\/p>\n\n\n\n Resins are packed in a vessel, and it calls as a resin bed. Resins play the leading role in water softening, and their duty is ion exchange. These plastic beads are electro statistically charged to attract their opposite charged ions. The softener resins are charged with sodium ions & captured negatively charged ions.<\/p>\n\n\n\n For water softening applications, permanently attached fixed negative charges are contained in plastic beads’ polymer structure. Sodium ions are connected to each fixed negatively charged functional group in the resin bead. Then Sodium ions are replaced but fixed negatively charged ions stay the same. <\/p>\n\n\n\n Yes. Resins do the key chemical process in Ion exchange.<\/p>\n\n\n\n IX resin technology has practically been used from the past for many applications. Water softening is one of them. <\/p>\n\n\n\n Some other methods can use for hardness removal. They are<\/p>\n\n\n\n <\/p>\n\n\n\n Among the above methods, here are advantages that support the ion exchange method to rise within the industry. IX resins only remove ions.<\/p>\n\n\n\n IX change does not occur on the surface but inside the copolymers. Plastic beads hold Na+<\/sup> ions initially. When hard water runs through the resin bed, beads catch the divalent ions and release their monovalent ions (Na+<\/sup> or K+<\/sup>). Negatively charged functional groups, which are immobile, hold these replacing cations at the interior of the resin bead, but rarely does it exchange ions at the bead’s surface.<\/p>\n\n\n\n When the resin bed gets saturated, hardness ions haven’t more space to create affinity with immobilized negative ions in resins. So we need to refresh resin; hence, the reverse ion exchange process should have proceeded. It is called “Regeneration.” <\/p>\n\n\n\n Use saline solution or brine solution (NaCl) to regenerate resin media. This solution should have enough strength to drive the reverse reaction of IX. Concentrated NaCl enters the resin bed and exchanges Na+ ions with hardness ions. The softener bed is getting reactive now. Before injection of brine solution, it is needed to be backwash the softener unit.<\/p>\n\n\n\n Careful maintenance of resins increases its lifetime.<\/p>\n\n\n\n The ability to remove hardness from the water is related to the volume of resin in the tank.<\/p>\n\n\n\n Resins can categorize into two types due to their structure.<\/p>\n\n\n\n Gel resin has microporosity with small pore volumes due to the fewer crosslinks. But considering to gel type, macroporous resins have large pore sizes. These large pores allow water and salts to direct contact with the interior of beads. Gel resins pass lights through its phase, but another type is opaque. Gel-type resin is commonly used in water softening.<\/p>\n\n\n\n <\/p>\n\n\n\n Resin manufacturers produce resins into the standard grading from 0.3 mm to 1.2 mm. sometimes, special grades are made; fine mesh 0.3-0.6mm, coarse mesh 0.6-1.2mm are manufactured for different purposes.<\/p>\n\n\n\n Fine mesh resins that increase the surface area for ion exchange can be used for softening due to their high operating capacities and ease of regeneration. Tiny resin beads are packed tightly in the vessel, which causes the water flow rate to slow. It is not suited for high flow systems and water with high turbidity.<\/p>\n\n\n\n Coarse mesh resins are specially manufactured for industrial high-flow water softening systems. They can minimize the pressure losses with suspended particles in raw water.<\/p>\n\n\n\n Different types of IX Resins are specially manufactured to use for different kinds of purposes. The ionized functional group attached to their hydrocarbon network causes different Chemical behaviors in each resin type. We can identify the most common types as follows.<\/p>\n\n\n\n SAC resins are highly ionized and neutralize strong bases, and neutral salts are converted into corresponding Acids. The ionized group bind the Sulfonic acid group (-SO3<\/sub>H). They exchange monovalent cations (Na+<\/sup> and H+<\/sup>) all over the pH range.<\/p>\n\n\n\n Essential applications of SAC resins are softening and complete demineralization. SAC resins remove all cations in raw water in demineralization.<\/p>\n\n\n\n WAC resins are widely used in softening and dealkalization. WAC can remove temporary hardness by about 80%. It is not able to eliminate all cations in many water systems. Compared to the SAC system, WAC resin systems have high regeneration performance. So it helps to decrease the amount of acid used to regenerate the resin. These are ionized to carboxylic group (COOH) and remove cations. These resins have high oxidation resistance capacity and perform mechanical durability.<\/p>\n\n\n\n SBA neutralizes strong acids, and neutral salts are converted into corresponding Bases. SBA type is also highly ionized as SAC resins and hydroxide form are used for water deionization in the entire pH range. Due to the two functions of quaternary ammonium groups, they were named Type I (with three methyl groups) and Type II (with one methyl group).<\/p>\n\n\n\n WBA resin functionality is bound with primary, secondary, and tertiary amine groups. Represent the formulas R-NH2<\/sub>, R-NHR\u2019, R-NR\u20192<\/sub>, respectively. WBA resins sorb the acid. The ionization of WBA resins is strongly influenced by pH.<\/p>\n\n\n\n R-NH2<\/sub> + HCl \u2192 R-NH3<\/sub>Cl<\/p>\n\n\n\n Chlorine and chloramines degrade resins. When oxidation occurs, DVB crosslinks are attacked. So chlorine degradation stops the channel function.<\/p>\n\n\n\n When hard water contains ferric or ferrous ions (with no correct pH maintenance in the softener and backwashing errors, ferrous can convert into the ferric), iron fouling can occur in the resin bed. Also, Aluminum, Manganese, and some heavy metals can cause fouling.<\/p>\n\n\n\n Osmotic shock results in less effectiveness of resins and increases the pressure drops due to broken resin bead particles.<\/p>\n\n\n\n Due to the external water hammers, hydraulic shocks can occur in resins.<\/p>\n\n\n\n Due to their structure, softener resin can divide into gel type and macroporous size. Resin bead standard sizes vary from 0.3 mm to 1.2 mm. Fine mesh resins are more effective in softening than standard mesh sizes.<\/p>\n","protected":false},"author":1,"featured_media":2655,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"Types of Water Softener Resins and Other IX Resins - Felite\u2122","_seopress_titles_desc":"","_seopress_robots_index":"","footnotes":""},"categories":[1],"tags":[],"yoast_head":"\nWhy do we need a water softener?<\/h2>\n\n\n\n
What are water softening resins?<\/h2>\n\n\n\n
![\"Charge](\"https:\/\/felitecn.com\/wp-content\/uploads\/2022\/03\/WechatIMG865-1024x353.jpeg\")
<\/figure>\n\n\n\nDo resins important in softening?<\/h2>\n\n\n\n
\n
\n
How do IX resins work?<\/h2>\n\n\n\n
What are water softener resin types on their structure and grading?<\/h2>\n\n\n\n
\n
Gel Resins vs. Macroporous Resins<\/h3>\n\n\n\n
![\"\"](\"https:\/\/felitecn.com\/wp-content\/uploads\/2022\/03\/WechatIMG864-1024x353.jpeg\")
<\/figure>\n\n\n\nResin Grading<\/h3>\n\n\n\n
Are there different types of resins?<\/h2>\n\n\n\n
\n
Strong Acid Cations (SAC) Resins<\/h3>\n\n\n\n
Weak Acid Cations (WAC) Resins<\/h3>\n\n\n\n
Strong Base Anions (SBA) Resins<\/h3>\n\n\n\n
\n
Weak Base Anions (WBA) Resins.<\/h3>\n\n\n\n
Are there any limitations of softener resins?<\/h2>\n\n\n\n
Conclusion<\/h2>\n\n\n\n
\n